Online Special!

Num’axes 4G 24MP No Glow Trail Camera – PIE1052


  • Video resolution up to FULL HD 1080P
  • Photo resolution up to 24 MP
  • Free mobile app (Android/iOS)
  • Works with 2G, 3G and 4G networks
  • Wide detection angle (PIR): 100 degrees
  • Wide field of view: 100 degrees
  • 2-year warranty
  • Weather resistant (IP66)
  • Trigger speed: between 0.35 and 0.4 second
SKU: NGPIEPHO022-PIE1052 Category: Tags: ,

With the PIE1052 trail camera, you will receive the photos or videos captured (photos by MMS or Email, videos by Email).
A GPS antenna allows you to see geolocation information on the photos taken.
When you insert the SIM card, the camera will automatically detect the mobile operator and setup the corresponding sending parameters (2G, 3G and 4G compatible).
Thanks to the 4G network, the photo and video transmission is faster and the power consumption lower.
The PIE1037 trail camera can be setup and activated remotely thanks to a free mobile app available for Android and iOS.
Wide detection angle: 100°
Wide field of view: 100°

PIE1052 Trail Camera Features

Wide field of view: 100

PIR sensor (motion sensor):
Wide detection angle: 100
Detection distance: up to 65 feet (20 meters)
Adjustable sensitivity: low / medium / high

Infrared flash:
Invisible black LEDS
Range: up to 65 feet (20 meters)

You can turn off part of the LEDS :
Allows you to avoid overexposed night photos/videos
Useful if you plan to place the camera at very close range to the subject you want to photograph or film.
Automatic IR Flash (activated according to brightness)

Photos and/or videos recipients:
You can enter 1, 2, 3 or 4 mobile phone numbers (recipients will only receive MMS and therefore only photos, no videos)
You can enter 1, 2, 3 or 4 e-mail addresses (recipients will receive MMS or e-mails and therefore photos and/or videos)

Photo sending:

by MMS: you can send photos only in small size (640×480)

by e-mail (FTP or GPRS): you can choose the size of the photos send by e-mail:
Small size (640×480)
Large size (1920×1440)
Original size (5 MP, 8 MP or 12 MP depending on the photo resolution selected)

Video sending:

By e-mail (FTP or SMTP) only and if the 4G network is available in the area where the trail camera is installed

You can setup and activate the camera remotely thanks to a free mobile app (Android/iOS – Name of the application: PIE1037 + PIE1023)

When you insert the SIM card, the camera will automatically detect the mobile operator and setup the corresponding sending parameters (only if your operator is preprogrammed in the device).

Remote antenna supplied:

Very useful in the areas where the network is weak
Antenna height: 22 cm – cable length: 2 m – magnetic base

Capture modes:

Still images: from 1 to 2 images per trigger
Videos with audio recording: fixed length (10 seconds)
Still images + videos with audio recording: a still photo and a video clip are both captured for each trigger

Image resolution: 8 MP / 12 MP / 24 MP

Image file format: JPEG

Video resolution: WVGA / HD 720P / Full HD 1080P

Video file format: MOV

PIR detection mode: the camera will take photos or videos when triggered by the PIR sensor detecting activity in the area it covers

Time Lapse mode: the camera will take photos or videos automatically at your choice of interval during a defined period of time you set up

Hybrid mode: PIR detection + Time Lapse

Date, time, temperature (in °C), moon phase, serial number and battery level imprint on the photos and videos

External memory support: SD card or micro SD card with adapter from 4GB up to 32GB, class 10 minimum

Cycle recording on the SD card:
User programmable: ON/OFF
When the SD card will be full, the camera will continue to record new photos/videos by deleting the oldest photos/videos.

Identification number of the device: Programmable – allows you to identify from where and from which camera the photos are

Password: Programmable

Reliable and efficient

PIE1052 Trail Camera Specifications

  • Weight: 418 g (without batteries) - 696 g (with batteries)
  • Dimensions: 148 x 116.5 x 75.5 mm
  • Remote antenna supplied
  • Power: 12 x AA alkaline batteries or 12 AA Ni-MH rechargeable batteries (not supplied) – You can purchase those batteries at any time on this web site.
  • Optional extra: power supply and solar panel
  • 2.4″ color LCD screen : for easy set up and replay photos/videos
  • Built-in 2.0 USB port for images/videos download

Whats in the box

1 x Trail camera model PIE1052
1 x remote antenna
1 x metal cap
1 x USB cable
1 x nylon mounting strap
1 x  user’s guide


Listed below are some useful pointers on how to use your trail camera to get the best results:
Mount the camera about 1.5 m (5ft) high with the camera pointed at a slight downward angle.
Mount the trail camera facing north or south not east or west as the rising ans setting of the sun could produce false triggers and overexposed images.
If you’re covering a trail, face the camera down or up the trail.
Clear out any brush or weeds in front of the trail camera. These can cause false triggers due to temperature and motions disturbances in front of the camera (especially on windy days).

Additional information


Pin It on Pinterest